Specifically designed for commercial pools and spas. PoolLink® 1000 Series automates control of pH and ORP/ pm levels. A specialized microcomputer is at the heart of every PoolLink®. This technology allows the controller to perform complex and exceptionally accurate control functions with the added benefit of versatility, easy set-up, and operation.
Model PoolLink® 1000 Series – microprocessor based proportional dosing chemical treatment controller.
Model PoolLink® 1100 – 1000 model with Super Chlorination, date and time functionality, temperature monitoring and external alarm interface.
Model PoolLink® 1200 – 1100 with thermal dot matrix printer, a full range of interval and specific request printing functions.
Model PoolLink® 1300 – 1100 with an internal modem and the Sitelink ™ PC based central monitoring and control software
True Proportional Dosing – PoolLink® 1000 Series performs continuous monitoring and correction of pH and sanitizer according to your present levels.
Ease of Use – No knobs, or screwdriver adjustments to make. All values are entered with a simple keypad. The Liquid Crystal Display (LCD) shows the current pH, ORP, ppm, and temperature. The operation that the controller is currently performing is also displayed.
1. Puts manual feed control and offset standardization right at your fingertips
2. User Menu provides access to basic operating functions – allowing the ideal pH, sanitizer settings and other primary operational functions to be adjusted within preset alarm or operational limits.
3. Service Menu is accessed with a special keystroke combination – allowing the supervisor to set the control mode, set or alter alarms values and have full programming access.
The time it takes chemicals to completely mix into the water varies from pool to pool and spa to spa. Without some method of accounting for this variance, a controller that works well on a large pool may overdose on spas. Thus, PoolLink® incorporates separate and adjustable mixing times for pH and sanitizer. This Dynamic Proportional Mix Compensated (DPMC) control, lends to the precise treatment of any size body of water.
Calibrations (Offsets) to compensate for probe drift are done through the microprocessor – which does not change probe slope characteristics. A complete and separate alternative chlorination setpoint can be programmed for Super-Chlorination or a second ideal setting. Operators may schedule what weekday and time to start alternative chlorination, in addition to how long to use the alternative chlorination setpoint.
Since PoolLink® is microprocessor based it can be linked to a computer – down the hall or on another continent. Sitelink ™ is a PC based program designed specifically for remote communication with Link Automation equipment. Everything that can be done from the faceplate can be done from your office or home.
Direct access to the PoolLink® 1300 over a phone line or RS-232 connection will give the operator up-to-the-second information. The current chemistry levels, alarm settings, and controller history is just a phone call away. The entire set of operating parameters can be transferred to the PC for review and alteration, then sent back to the PoolLink® 1300. Sitelink allows the operator to scroll through PoolLink® menu structure and alter settings just as is done in the equipment room.
pH Range 4.0 – 10.0
pH Display Resolution 0.1
ORP Range 500 – 1000 mV
ORP Display Resolution – 2mV
Chlorine/ppm Range 0.1 – 12.0+ ppm
Chlorine/ppm Display Resolution 0.1 ppm
Temperature Range 60- 120 F
Temperature Resolution 1 F
Input Power – 120 VAC 60 Hz, less than 1 Amp, excluding pumps, 3 wire grounded plug GFCI source required
Output Power – (2) switched standard 3-wire grounded outlets, 120 VAC 60 Hz, 6 Amps cumulative, fused
Display – 2 x 16 character digital display, multi-color flashing LED indicator
Enclosure – PVC NEMA 12 with hinged cover and lockable hasp
Size – 10.5” x 8.9” x 6.0”
Printer 40/80 column thermal dot matrix
Modem 56k Baud internal modem
Communication Software Sitelink ™ PC based communication software