CALL US

803-793-4265

  • Shown in this image is the Mermade Filter 100 series commercial pool automatic chemical controlller for commercial pools. It is a rectangular, off-white box with power cords at thebottom, a small screen with 4 progrmmin buttons and a small digital display. It says

    200 Series Automatic CO2 Feed System

top view of the mermade filter automatic co2 feed system by pool link. The top view shows the unit with power cord and outlet and inlet ports. the unit is off white and about 8inches by 8 inches square with a flow meter and title that says

A SAFER WAY DEAL WITH STRONG ACIDS AND THE FORMING OF CHLORINE GAS
The simple and natural way of controlling and stabilizing the swimming pool pH is by raising total alkalinity. The PoolLink® 200 series eliminates handling strong acids and the forming of chlorine gas in the filter room or re-circulation system. PoolLink® 200 Series also forms carbonic acid and bicarbonate buffer in water and makes it impossible to lower the pH below 6.8. Multiple models are available for single, double or bulk tank configurations. It is easy to install and operate.

Model CO2 201 – Single Tank CO2 Feed System – Wall mounted CO2 Feed Unit Controller, ABS panel contains 10-100 SCFH flow meter, 120-volt quiet acting solenoid valve and on/off switch. The system includes a single tank pressure reg­ulator with 0-100 psi discharge pressure mounted on a gas cylinder with gauges for cylinder pressure and system pressure. Injection valve with built-in check valve and CO2 diffuser. Polyethylene tubing (SOFT).

Model CO2 202 – Dual Tank CO2 Feed System – Wall mounted CO2 Feed Unit Controller, ABS panel contains 10-100 SCFH flow meter, 120-volt quiet acting solenoid valve and on/off switch. The system includes two (2) single tank pres­sure regulators with 0-100 psi discharge pressure mounted on a gas cylinder with gauges for cylinder pres­sure and system pressure. Two (2) tank PVC manifold. Injection valve with built-in check valve and CO2 diffuser. Polyethylene tubing (50 FT).

This image shows the bottom view of the Pool Link 200 series automatic CO2 Feed Sytem controller. This bottom shows an in and out line port and a power cable port. Also seen in view is the toggle switch and flow meter for the unit.

Model CO2 203 – Three Tank CO2 Feed System – Wall mounted CO2 Feed Unit Controller, ABS panel contains 10-100 SCFH flow meter, 120-volt quiet acting solenoid valve and on/off switch. The system includes three (3) single tank pressure regulators with 0-100 psi discharge pressure mounted on a gas cylinder with gauges for cylinder pressure and system pressure. Three (3) tank PVC manifold. Injection valve with built-in check valve and CO2 diffuser. Polyethylene tubing (50 FT).

Model C02 204 – Dual Tank Auto Change-Over CO2 Feed System – Wall mounted CO2 Feed Unit Controller, ABS panel contains 10-100 SCFH flow meter, 120-volt quiet acting solenoid valve and on/off switch. The system includes an auto change-over pressure regulator with 0-100 psi discharge pressure, with gauges for cylinder pressure and system pressure. Injection valve with built-in check valve and CO2 diffuser. Polyethylene tubing (5OFT).

this is a schematic drawing of the 200 series automatic co2 feed system by pool link
Title Size
Mermade Filter 200 Series Automatic CO2 Feed System Brochure 663.20kB Preview Download
Top